Cast Iron G2 Product Guide

Applications | Specifications | Mechanical and Chemical Data

Overview

Cast Iron G2 Dura-Bar is a non-ductile, pearlitic gray iron, exhibiting good machinability, wear resistance, and vibration dampening. G2 will not yield nor elongate before fracture.

G2 Dura-Bar can be oil quench hardened from 1600 F (885 C) to a minimum hardness of Rockwell C 50 on the outside of the bar. The inside diameter hardness will be less than Rockwell C 50.

G2 Dura-Bar is manufactured through the Continuous Cast process, which is actually closer to extrusion than casting. However, this process causes all of the impurities in the molten iron to float to the top of the crucible, away from the metal being used to create the bar. This removes porosity and other impurities common to other cast iron grades.

It is typically used in the automotive and power industries for gears, rotors, pistons, valves, rollers, bushings, chucks, flywheels, pile drivers, rams pulleys, housings, and motorcycle disc brakes.

DURA-BAR is a trademark of Dura-bar.

Common Trade Names

Gray Iron, Class 40 

Other Resources

Safety Data Sheet | Weight Calculator | Mill Test Reports

Products

Purchase Hollowbar G2 | Rectangle Bar G2 | Round Bar G2 | Square Bar G2

Applications

• Automotive Parts
• Power Transmission Parts
• Gears
• Rotors
• Pistons
• Valves
• Rollers
• Bushings
• Chucks
• Flywheels
• Pile Drivers
• Ram Pulleys
• Housings
• Motorcycle Disc Brakes

Cast Iron G2 Specifications